Great Lakes Case and Cabinet » Fan Controllers and Cords

Fan Controllers and Cords

Home » Products » Accessories » Cooling » Fan Controllers and Cords


FTC101	FTC102

Fan Controller and Cords

Part No.

Description

FTC101

Fan Thermostat Controller, Thermostat controlled 15 amp duplex outlets, UL listed, CSA certified thermostat, 50° to 90°F / 10° to 30°C temperature range, 6 ft. cord.

FTC102

Remote or Local Access Fan Control Unit. Thermostat range between 60-100° F. UL and c-UL Listed 60950; compatible with Shaded Pole and Split Capacitor Fans; 1 RMU (cord required); This product is a special order, please call for lead time. See below for complete specifications

PC13-515P

Power cord for fan controller, 5′6″ length, 2 required for dual a/c input (125 Volts); for use with FTC102

PC13-C14

Power cord for fan controller, 3′3″ length, 2 required for dual a/c input (125/250 Volts); for use with FTC102

GL-ST12

Temperature Sensor, 12 ft.; for use with FTC102

FTC102: Remote of Local Access Fan Control Unit
Local Input

125 or 250V
No Circuit Breaker
Dual A/C input – 2 C-14 IEC -auto-switching in event of power failure
- 90-264 Volt auto sensing
RJ-45 ethernet connection
- Access via web browser
- Direct connection available via crossover cable
Four RJ jacks for connection of up to 4 remote temperature sensors
Fan speed manual/local override via rotary switch – unplug ethernet connection
- Set point change button must be pressed while activating rotary switch
- Rotary switch with recessed screwdriver slot
- Manual temperature set-points of 65-100 degrees F
- Manual full on setting for 100% fan speed
Plug and Play, no client software required

Remote Input – Three Levels of Password Protection

Temperature set-points of 65-100 degrees F
Optional full on setting for 100% fan speed
Friendly device and sensor names
Fahrenheit or Celsius selection
Low and high trip level selection
Alarm notification selection
- SNMP trap, e-mail and/or audible buzzer

Local Output

Three C-13 IEC outlets for AC fan connection, 267 watts per outlet
Fan speed control of 30-100%
- Fans start on full speed for 1 second and then adjust to the necessary speed to maintain set point temperature
Scrolling digital display of real-time measurements
- Set point temperature
- Internal temperature
- Four external temperature
- Fan speed percentage
Audible alarm with silence reset button
Fan running visual indicator LED’s
- Speed – running at a Level less than full Full On – orange LED
- Fan manually off – orange LED
- Remote control – orange LED
- Fan Full on – orange LED
- Over temp – red LED

Remote Output

Real-time measurements and graph
- Set point temperature
- Internal temperature
- Four external temperatures
- Fan Speed
Log data available for export via XML or real-time via SNMP
Event log with variable content settings
Visual image display from optional IP addressable camera