- Knockouts and openings for top and bottom cable access
- Repositionable finger sections along each rails
- Open side area to accommodate large bundles within and between ganged enclosures
Optional accessories create a complete cable management and cooling solution
- Baffle kits for CISCO® switches (and other side-to-side airflow equipment) directs cool air in and exhaust out of equipment
- 19" cable managers can be added
- Zero RMU mounting brackets allow vertical mounting of patch panels and power strips to save valuable RMU space
The EN ships completely assembled and is ready for immediate use! Two enclosure sizes means no complicated extension kits are needed.
- EN Features
- EN Configurations
- GL840EN-3242
- GL840EN-4048
- EN Baffle Kits
1. EN FRAME
• No corner posts create room for large bundles
outside of rails
• Easily ganged together at top of frame
2. TOP CABLE ACCESS
• Large knockouts for top cables
3. RAILS
• Two sets of 45 RMU, tapped #12-24 rails
(M6 configurations also available)
• Front rails are fixed and recessed 8" from front
of enclosure (6.5" on 840ENT3242)
• Rear rails are fully adjustable
• Maximum rail spacing of 32" (29" on 840ENT3242)
• Flexible Mounting Profile (FMP) allows mounting of
accessories that do not interfere with EIA pattern;
3 sets on holes on each rails (front, side and rear of rail)
4. CABLE MANAGEMENT FINGERS
• Fingers come in 7 RMU sections; 6 sections (total of
42 RMU) are standard on each front and rear rail
• Finger openings align with RMUs for easy
cable pathways
• Finger sections are repostionable
• Additional 7 RMU finger sections available,
Part No. CM-47
5. BOTTOM CABLE ACCESS
• No bottom panel creates easy under-floor access
of cable bundles and large PDUs
• Optional Koldlok raised floor grommets seal floor
tile cutouts while allowing cables to pass through
6. PDU BRACKETS
• One pair of brackets on each rear rail
• Easily repostionable for various PDU sizes
7. DOORS
• Split mesh doors on front and rear of enclosure
• Front mesh rear door and split mesh rear doors on
840ENT3242
• Swing handle with keyed lock
8. SIDE PANELS
• Solid lift off sides
• Locks at top of panel
• No corner posts create room for large bundles
outside of rails
• Easily ganged together at top of frame
2. TOP CABLE ACCESS
• Large knockouts for top cables
3. RAILS
• Two sets of 45 RMU, tapped #12-24 rails
(M6 configurations also available)
• Front rails are fixed and recessed 8" from front
of enclosure (6.5" on 840ENT3242)
• Rear rails are fully adjustable
• Maximum rail spacing of 32" (29" on 840ENT3242)
• Flexible Mounting Profile (FMP) allows mounting of
accessories that do not interfere with EIA pattern;
3 sets on holes on each rails (front, side and rear of rail)
4. CABLE MANAGEMENT FINGERS
• Fingers come in 7 RMU sections; 6 sections (total of
42 RMU) are standard on each front and rear rail
• Finger openings align with RMUs for easy
cable pathways
• Finger sections are repostionable
• Additional 7 RMU finger sections available,
Part No. CM-47
5. BOTTOM CABLE ACCESS
• No bottom panel creates easy under-floor access
of cable bundles and large PDUs
• Optional Koldlok raised floor grommets seal floor
tile cutouts while allowing cables to pass through
6. PDU BRACKETS
• One pair of brackets on each rear rail
• Easily repostionable for various PDU sizes
7. DOORS
• Split mesh doors on front and rear of enclosure
• Front mesh rear door and split mesh rear doors on
840ENT3242
• Swing handle with keyed lock
8. SIDE PANELS
• Solid lift off sides
• Locks at top of panel
Content for class "clear" Goes Here
Both sizes of EN Enclosures are available in three configurations: as a complete enclosure, with doors only, and just a frame. Rails can be either tapped #12-24 or M6. Pictured below are GL840ENT-4048 configurations..
The GL840ENT-4048SSS includes
#12-24 rails with cable management fingers on all rails, levelers, solid sides, solid top, split mesh front and rear doors, and a 25 RMU baffle kit.
The GL840ENT-3242MSS includes solid sides, mesh front door, and a split mesh rear door.
.png)
The GL840ENT-4048SSS-NS includes #12-24 rails with cable management fingers on all rails, levelers, solid top, split mesh front and rear doors and a 25 RMU baffle kit.
The GL840ENT-3242MSS-NS includes a mesh front door and a split mesh rear door.
.png)
The GL840ENT-4048-FK is an enclosure frame (#12-24 rails with cable management fingers on all rails) with levelers and a 25 RMU baffle kit.
The GL840ENT-3242-FK is a frame with cable management fingers.
Content for class "clear" Goes Here
The GL840ENT-4048SSS includes
#12-24 rails with cable management fingers on all rails, levelers, solid sides, solid top, split mesh front and rear doors, and a 25 RMU baffle kit.
The GL840ENT-3242MSS includes solid sides, mesh front door, and a split mesh rear door.
The GL840ENT-4048SSS-NS includes #12-24 rails with cable management fingers on all rails, levelers, solid top, split mesh front and rear doors and a 25 RMU baffle kit.
The GL840ENT-3242MSS-NS includes a mesh front door and a split mesh rear door.
The GL840ENT-4048-FK is an enclosure frame (#12-24 rails with cable management fingers on all rails) with levelers and a 25 RMU baffle kit.
The GL840ENT-3242-FK is a frame with cable management fingers.
Content for class "clear" Goes Here
.png)
EN Enhanced Networking Enclosures- GL840EN-3242
Dimensions: 84.00"H x 32.00"W x 42.00"D
Rack Spaces: 45 RMU, 19" EIA 310-E Compliant
Weight Capacity: 2000 lbs. on levelers or bolted to floor
Stock Color: Black
Shipping Weight: 350 lbs.
Shown with optional accessories
Dimensions: 84.00"H x 32.00"W x 42.00"D
Rack Spaces: 45 RMU, 19" EIA 310-E Compliant
Weight Capacity: 2000 lbs. on levelers or bolted to floor
Stock Color: Black
Shipping Weight: 350 lbs.
Shown with optional accessories
Content for class "clear" Goes Here
| Part No. | Description | Technical Drawing |
| GL840ENT-3242MSS | 84"H x 32"W x 42"D EN enclosure with two pair of tapped #12-24 mounting rails with cable management "fingers"; includes 8 levelers, solid top, mesh front door, split mesh rear door, and solid sides; |
 |
| GL840ENT-3242MSS-NS | 84"H x 32"W x 42"D EN enclosure with two pair of tapped #12-24 mounting rails with cable management "fingers"; includes 8 levelers, solid top, mesh front door, and split mesh rear door; sides not included |
|
| GL840ENT-3242-FK | 84"H x 32"W x 42"D EN frame with two pair of tapped #12-24 mounting rails with cable management "fingers" on all rails; includes 8 levelers; doors and sides not included | |
| For enclosure with M6 rails, remove 'T' from part number. | ||
Content for class "clear" Goes Here
| GL840ENT-3242 Series Accessories | |
| Doors & Side Panels |
|
| 8402EN-M32 | Mesh Door Assembly for 32"W EN Enclosure |
| 8402EN-32SM | Split Mesh Door Assembly for 32"W EN Enclosure |
| 8410421-ENLS | Solid Side Panel for 42"D EN Enclosure |
Content for class "clear" Goes Here
| Removable Top Panels |
|
| TPEN-S | Solid Top Panel |
| TPEN-P | Perforated Top Panel |
| TPEN-F | Top panel with fan guards and three, 75 CFM fans |
| TPEN-F10 | Top panel with fan guard and one 10", 550 CFM fan |
| TPEN-2F10 | Top panel with fan guard and two 10", 550 CFM fans |
Content for class "clear" Goes Here
| Cable Management |
|
| ENC-K24 | Cable Management Rail Kit; includes 24 sections of "fingers" (each section 7 RMU) |
| CM-47 | Single section of Cable Management "fingers" (7 RMU) |
| TCT40 | Top Cable Trough for 40"W EN Enclosure |
| LRB-12 | Ladder Rack Bracket for 12"W ladder rack |
| LRB-24 | Ladder Rack Bracket for 24"W ladder rack |
Content for class "clear" Goes Here
| Other Accessories |
|
| G101EN | Networking/Ganging Kit used to gang two EN enclosures together |
| G101EN2ES | Networking/Ganging Kit used to gang an EN enclosure to a Great Lakes ES enclosure |
| CBB-72 | Copper Bus Bar, 70.00" (isolated) |
| GR101 | Grounding Kit |
| 7208-EN | Set of four caster assemblies for EN enclosures |
Content for class "clear" Goes Here
EN Enhanced Networking Enclosures- GL840EN-4048
Dimensions: 84.00"H x 40.00"W x 48.00"D
Rack Spaces: 45 RMU, 19" EIA 310-E Compliant
Weight Capacity: 2000 lbs. on levelers or bolted to floor
Stock Color: Black
Shipping Weight: 350 lbs.
Shown with optional accessories
Dimensions: 84.00"H x 40.00"W x 48.00"D
Rack Spaces: 45 RMU, 19" EIA 310-E Compliant
Weight Capacity: 2000 lbs. on levelers or bolted to floor
Stock Color: Black
Shipping Weight: 350 lbs.
Shown with optional accessories
Content for class "clear" Goes Here
| Part No. | Description | Technical Drawing |
| GL840ENT-4048SSS | 84"H x 40"W x 48"D EN enclosure with two pair of tapped #12-24 mounting rails with cable management "fingers" on all rails; includes 8 levelers, solid top, split mesh front door, split mesh rear door, solid sides, and baffle kit (25 RMU) for CISCO 7018 switch |
|
| GL840ENT-4048SSS-NS | 84"H x 40"W x 48"D EN enclosure with two pair of tapped #12-24 mounting rails with cable management "fingers" on all rails; includes 8 levelers, solid top, split mesh front door, split mesh rear door, and baffle kit (25 RMU) for CISCO 7018 switch; side not included |
|
| GL840ENT-4048-FK | 84"H x 40"W x 48"D EN enclosure with two pair of tapped #12-24 mounting rails with cable management "fingers" on all rails; includes 8 levelers and baffle kit (25 RMU) for CISCO 7018 switch; doors and sides not included | |
| For enclosure with M6 rails, remove 'T' from part number.
|
||
Content for class "clear" Goes Here
| GL840ENT-4048 Series Accessories | |
| Doors & Side Panels |
|
| 8402EN-40SM | Split Mesh Door Assembly for 40"W EN Enclosure |
| 8410481-ENLS | Solid Side Panel for 48"D EN Enclosure |
Content for class "clear" Goes Here
| Removable Top Panels |
|
| TPEN-S | Solid Top Panel |
| TPEN-P | Perforated Top Panel |
| TPEN-F | Top panel with fan guards and three, 75 CFM fans |
| TPEN-F10 | Top panel with fan guard and one 10", 550 CFM fan |
| TPEN-2F10 | Top panel with fan guard and two 10", 550 CFM fans |
Content for class "clear" Goes Here
| Cable Management |
|
| ENC-K24 | Cable Management Rail Kit; includes 24 sections of "fingers" (each section 7 RMU) |
| CM-47 | Single section of Cable Management "fingers" (7 RMU) |
| TCT40 | Top Cable Trough for 40"W EN Enclosure |
| LRB-12 | Ladder Rack Bracket for 12"W ladder rack |
| LRB-24 | Ladder Rack Bracket for 24"W ladder rack |
Content for class "clear" Goes Here
| Other Accessories |
|
| G101EN | Networking/Ganging Kit used to gang two EN enclosures together |
| G101EN2ES | Networking/Ganging Kit used to gang an EN enclosure to a Great Lakes ES enclosure |
| CBB-72 | Copper Bus Bar, 70.00" (isolated) |
| GR101 | Grounding Kit |
| 7208-EN | Set of four caster assemblies for EN enclosures |
Content for class "clear" Goes Here
.png)
Baffle Kits create proper airflow for switches and side-to-side airflow equipment, as suggested by manufacturers such as CISCO. Cool air is channeled into the equipment along the right side and exhaust air is directed out along the left side of the equipment. Kits are tool-less and easily attach to rails outside of the EIA mounting profile.
Content for class "clear" Goes Here
| Baffle Kits for EN Enclosures | ||
| Part No. | Description | Technical Drawing |
| ENSAB19 | Side Air Baffle Kit for use with 15.8"D to 18.5"D, 19 RMU CISCO and other side-to-side airflow equipment | |
| ENSAB14 | Side Air Baffle Kit for use with 15.8"D to 18.4"D, 14 RMU CISCO and other side-to-side airflow equipment | |
| ENSAB14D | Side Air Baffle Kit for use with 25.7"D to 28"D, 14 RMU CISCO and other side-to-side airflow equipment |
|
| ENSAB11 | Side Air Baffle Kit for use with 15.8"D to 18.1"D, 1 RMU CISCO and other side-to-side airflow equipment |
|