Top Panel Options
A variety of fan top panels are available for the E Series, including panels with three, 75 CFM fams; one, 10" 550 CFM fan; and two, 10" CFM fans. Solid and perforated tops are also available.
Horseshoe Knockouts on Top Panels
All E Series top panels feature two, 4" horseshoe knockouts. Knockouts allow cables to be routed overhead; top panels can be removed and interchanged without interfering with equipment.
Door Handle Options
Locking swing handles are standard on front and rear doors, but can easily be switched to provide increased security. Choose from a combination and key handle, padlock and key handle, or simply a padlock.
All E Series enclosures are stocked in three colors, including Black, Advantage White, and Nitro Blue. Custom colors are available and require no minimum order quantity
A variety of bottom panels can be added to the enclosure, including brush grommet panels; cable is able to pass through while still maintaining raised floor air pressure.
As part of new UL2416 requirements, enclosures are configured with grounding kits that feature quick disconnect wires. When doors and side panels need to be removed, simply pull the wire apart.
PDU Mounting Brackets
Optional Power Strip Mounting Brackets can be installed in the rear corner of the enclosure to accommodate button mounting of PDUs from nearly any manufacturer.
A 16 position, 15 amp power strip is standard with 72"H and larger enclosures. Power strips are installed vertically in the rear of the enclosure using snap in clips. 48 and 60"H enclosures feature an 8 position power strip for vertical mounting. While a 6 position power strip for 19" mounting is standard in 30"H enclosures.
Vertical & Horizontal Cable Bars
To help secure cables inside the enclosure. Cable Management Bar Kits can be used to route cable from the front to rear, and from bottom to top. Kits include one vertical bar, two horizontal bars, and six, 12"L cinch straps.
19" Fan Trays
Use optional fan trays to eliminate hot spots within the enclosure. Fan trays are front to rear mount adjustable and are available with three, six or nine, 75 CFM fan assemblies. Each bar features a square hole pattern that accepts optional ¼ turn "D" rings.
Flexible Mounting Profile
Each rail features Great Lakes' Flexible Mounting Profile (FMP), a series of holes along the rail but outside of the EIA pattern. The FMP allows a variety of Great Lakes accessories, including cable management "fingers" and ZR Brackets, to be directly mounted to the rail without taking up RMU space. ZR Brackets can be installed in 29"W enclosures to accommodate mounting of 1 and 2 RMU, 19" EIA equipment.
|GL840E-2936||44||84"H x 29"W x 36"D|
|GL840E-2932||44||84"H x 29"W x 32"D|
|GL840E-2436||44||84"H x 24"W x 36"D|
|GL840E-2432||44||84"H x 24"W x 32"D|
|GL720E-2936||37||72"H x 29"W x 36"D|
|GL720E-2932||37||72"H x 29"W x 32"D|
|GL720E-2436||37||72"H x 24"W x 36"D|
|GL720E-2432||37||72"H x 24"W x 32"D|
|GL600E-2432||31||60"H x 24"W x 32"D|
|GL480E-2432||24||48"H x 24"W x 32"D|
|GL300E-2432||13||30"H x 24"W x 32"D|